Tractor Reference

Massey Ferguson 240 Tractor (1980–1999)

Diesel tractor specs, serial checks, manuals, parts sources, and test reports for the Massey Ferguson 240.

Massey Ferguson 240 Overview

The Massey Ferguson 240 is a compact diesel tractor built for small-to-mid-size farm work. It is commonly listed around the 46 hp class, with a 540 rear PTO and a simple hydraulic setup that keeps it useful for everyday chores.

Before buying parts or planning service, match the tractor to its serial range, market version, engine, transmission, and PTO setup. The operator manual, service manual, parts sources, Nebraska summary, and OECD report are the best cross-checks for a specific MF 240.

Years1980-1999
Engine152 ci 2.5 L
Tested PTO34.77 hp 25.9 kW
Transmissionsliding gear
Rear PTO540
Weight4015 to 4585 pounds
Serial number lookup1980-1999 table
Engine options1980-1999 table
Hydraulic capacity1980-1999 table

Massey Ferguson 240 Quick Answers

  • Production yearsThe Massey Ferguson 240 was produced from 1980 through 1999.
  • PowerEngine power is published at 46 hp (34.3 kW); drawbar performance and PTO figures vary by configuration and testing.
  • EngineEngine displacement is 152 cu in (2.5 L).
  • PTO and hitchRear PTO is 540 rpm; rear hitch is Category II/I; PTO can be live with a two-stage clutch.
  • Service capacityHydraulic system capacity is 8.6 gal (32.6 L); coolant capacity is 10.4 qts (9.8 L).

Engine and Power

Engine and power figures center on a 46 hp diesel (152 cu in) with a 2000 rpm rated speed. The MF240 uses a dual dry-element air cleaner with optional ether pre-heating for cold starts.

Diesel engine

Perkins AD3.152 / diesel / 3-cylinder / liquid-cooled

Displacement152 ci 2.5 L
Bore Stroke3.60x5.00 inches 91 x 127 mm
Power46 hp 34.3 kW
Air Cleanerdual dry element
Pre Heatingether (optional)
Rated Rpm2000
Starter Volts12
Coolant Capacity10.4 qts 9.8 L

Manufacturer

Massey Ferguson

Manufacture years

1980-1999

Engine

46 hp 34.3 kW

Tested PTO

34.77 hp 25.9 kW

Tested drawbar

28.69 hp 21.4 kW

Transmission

Transmission is a sliding-gear type with 8 forward and 2 reverse gears. Shifts are performed with the clutch engaged and the tractor at a stop, reflecting straightforward mechanical operation.

8-speed sliding gear

Typesliding gear
Gears8 forward and 2 reverse

PTO and Hitch

Rear PTO is 540 rpm, with live rear PTO as a configuration possibility and a two-stage clutch action noted in typical setups.

Rear PTO

live (two-stage clutch)

Rear PTO type

540

Rear hitch

II/I

Hydraulics

Hydraulics are open-center with 2 control valves and a 9.5 gpm pump flow. System capacity is 8.6 gal, and the setup supports standard implement hydraulics for open-center systems.

Type

open

Capacity

8.6 gal 32.6 L

Pump flow

9.5 gpm 36.0 lpm

Valves

2

Fluids, Battery, and Service Facts

Maintenance notes highlight hydraulic and coolant capacities (8.6 gal and 10.4 qts, respectively) and a 12V electrical system. Specific fluid types, filters, belts, and battery group details require a parts catalog or operator manual for exact applicability.

Fuel tank

12.6 gal 47.7 L

Hydraulic system

8.6 gal 32.6 L

Battery volts

12

Tires and Dimensions

Tire and dimension values can vary by wheel, axle, and configuration.

Weight

4015 to 4585 pounds

Width

66.1 inches 167 cm

Front tire

6.00-16

Rear tire

13.6-28 (2WD)

Electrical

Electrical rows are included when documented.

Ground

negative

Charging system

alternator

Charging amps

32

Battery volts

12

Serial Number Lookup

Serial numbers are used to narrow model-year applicability; factory prefixes and regional builds require supporting documentation before applying year tables outside the stated range.

1983

524172

1984

552016

1985

557882

1986

862369

1986_late

U01001

1987

V01001

1988

N01001

1989

P01001

1990

R01001

1991

S01001

1992

A01001

1993

B01001

1994

C01001

1995

D01001

1996

E01001

1997

F01001

1998

G01001

location

Serial number plate on the lower right of the instrument panel.

Manuals and Documents

Use these links to check the operator manual, service manual, parts catalog, or test report that matches the tractor's serial range and equipment.

When a source covers more than one model or variant, confirm the fuel type, transmission, PTO setup, and serial range before using it for parts or service.

  • Massey Ferguson Tractors-Agricultural - Wheeled 240 / 243 / 253 / 263 Tractors (s/n B27001Operator manual covering MF 240 family (240, 243, 253, 263); applicability includes MF240 models.Open source
  • Massey Harris MF230 MF240 MF250 MF270 MF290 MF298 Service ManualService manual covering MF230/240/250/270/290/298; MF240 included.Open source
  • Massey Ferguson Tractor 240 Parts - Abilene MachineParts catalog page for MF240 tractors; provides OEM part reference context.Open source
  • Massey Ferguson 240 Tractor Parts - Anglo AgripartsUK/IE parts catalog for MF240; broad parts categories.Open source
  • Massey Ferguson 240 Parts - Yesterday's TractorsParts catalog page listing MF240 part categories and listings.Open source
  • Massey Ferguson 240 - TVH PartsFull MF240 parts catalog reference page from a global parts supplier.Open source
  • Nebraska Summary 001: Massey Ferguson 240 Diesel 8 SpeedNebraska Tractor Test (OECD Code) summary for Massey Ferguson 240 Diesel 8 Speed.Open source
  • Massey-Ferguson 240 OECD Test Report 688 (English), 1980OECD test report for MF240; includes test results under OECD Code 2.Open source

Parts Checks Before Ordering

Do not order Massey Ferguson 240 parts from the model name alone. Match the part to the tractor's model code, serial range, engine, transmission, and PTO setup before selecting service parts.

Filters, fluids, belts, electrical parts, clutch and PTO parts, and hydraulic parts can vary by configuration. Exact part numbers need a parts catalog, manual, or trusted supplier source before they become recommendations.

Accuracy Note

Tractor specifications can vary by year, region, factory configuration, installed equipment, and later repairs. Match serial range, engine, transmission, PTO setup, and model code before ordering parts or doing service work.