Tractor Reference

International Harvester B-614 Tractor Specs (1963-1968)

International Harvester B-614 tractor specs for 1963-1968: 281 ci diesel engine, 62.5 hp, 8-speed gear transmission, 540 PTO, and open-center hydraulics.

International Harvester B-614 Overview

International Harvester B-614 tractor in a rural farm setting.

The International Harvester B-614 was produced from 1963 through 1968. It has a 281 ci (4.6 L) diesel engine rated at 62.5 hp and 1600 rpm, backed by an 8-forward, 2-reverse gear transmission. The tractor uses a transmission-driven 540 PTO and a II rear hitch. Open-center hydraulics are rated at 2000 psi with 7.2 gpm pump flow. Fuel capacity is 20.4 gal, and listed weight is 6188 lbs.

Years1963-1968
Engine281 ci 4.6 L
Transmissiongear
Rear PTO540 (1.375)
Weight6188 lbs 2806 kg

International Harvester B-614 Quick Answers

  • YearsProduced from 1963 through 1968.
  • Engine281 ci (4.6 L) diesel rated at 62.5 hp and 1600 rpm.
  • Transmission8 forward and 2 reverse gears.
  • Rear PTOTransmission-driven 540 PTO with a 1.375 shaft.

Engine and Power

The 281 ci diesel engine is rated at 62.5 hp and 1600 rpm.

Diesel engine

Displacement281 ci 4.6 L
Rated Rpm1600

Manufacture years

1963-1968

Engine

62.5 hp 46.6 kW

Transmission

The gear transmission provides 8 forward and 2 reverse gears.

8-speed gear

Typegear
Gears8 forward and 2 reverse

PTO and Hitch

A transmission-driven 540 PTO works with the II rear hitch.

Rear PTO

transmission

Rear PTO type

540 (1.375)

Rear hitch

II

Hydraulics

Open-center hydraulics are rated at 2000 psi with 7.2 gpm pump flow.

Type

open center

Capacity

4.2 gal 15.9 L

Pressure

2000 psi 137.9 bar

Pump flow

7.2 gpm 27.3 lpm

Fluids, Battery, and Service Facts

Fuel capacity is 20.4 gal and hydraulic system capacity is 4.2 gal.

Fuel tank

20.4 gal 77.2 L

Hydraulic system

4.2 gal 15.9 L

Accuracy Note

Tractor specifications can vary by year, region, factory configuration, installed equipment, and later repairs. Match serial range, engine, transmission, PTO setup, and model code before ordering parts or doing service work.