Tractor Reference

John Deere 3010 Tractor: Row-Crop and Standard (1961–1963)

Row-Crop and Standard specs, engine choices, PTO, hydraulics, serials, manuals, and test reports for the John Deere 3010.

John Deere 3010 Overview

The John Deere 3010 was built from 1961 through 1963 in Row-Crop and Standard forms. Engine choice, transmission, PTO, and hydraulic setup affect how a particular tractor should be read against the specs.

Use serial data and the linked manuals or test reports before ordering parts or planning service. The 3010 sits early in Deere's New Generation line, so checking the exact configuration matters more than treating every 3010 listing as interchangeable.

Years1961-1963
Engine201 ci 3.3 L | 254 ci 4.2 L
Tested PTO59.44 hp 44.3 kW
Transmissionpartially synchronized
Rear PTO540/1000 (1.375)
Weight5624 to 6500 pounds
Serial number lookup1961-1963 table
Engine options1961-1963 table
Hydraulic capacity1961-1963 table

John Deere 3010 Quick Answers

  • Production yearsThe John Deere 3010 was produced from 1961 through 1963.
  • PowerPublished power data includes 59.44 hp (44.3 kW) drawbar at 52.77 hp (39.4 kW); match those figures to the documented engine/transmission setup before treating them as model-wide.
  • EngineEngine options include 201 ci 3.3 L and 254 ci 4.2 L.
  • PTO and hitchRear PTO: 540/1000 (independent); rear hitch: Category II.
  • Service capacityHydraulic system capacity listed as 9.5 gal (36.0 L).

Engine and Power

Engine options include 201 ci (3.3 L) gasoline and 254 ci (4.2 L) diesel, with LP-gas variants using the same displacement. Rated speed is 2200 rpm and starting is electric.

Gasoline engine

John Deere / gasoline / 4-cylinder / liquid-cooled inline

Displacement201 ci 3.3 L
Bore Stroke4.00x4.00 inches 102 x 102 mm
Air Cleaneroil bath
Compression7.5:1
Rated Rpm2200
Starterelectric
Starter Volts12

Diesel engine

John Deere / diesel / 4-cylinder / liquid-cooled inline

Displacement254 ci 4.2 L
Bore Stroke4.125x4.75 inches 105 x 121 mm
Air Cleaneroil bath
Compression16.4:1
Rated Rpm2200
Starterelectric
Starter Volts24

LP-gas engine

John Deere / LP gas / 4-cylinder / liquid-cooled inline

Displacement201 ci 3.3 L
Bore Stroke4.00x4.00 inches 102 x 102 mm
Air Cleaneroil bath
Compression7:1
Rated Rpm2200
Starterelectric
Starter Volts12

Manufacturer

John Deere

Manufacture years

1961-1963

Tested PTO

59.44 hp 44.3 kW

Tested drawbar

52.77 hp 39.4 kW

Transmission

Transmission is John Deere Syncro-Range, with 8 forward and 3 reverse, and a dry-disc clutch.

John Deere Syncro-Range

NameJohn Deere Syncro-Range
Typepartially synchronized
Gears8 forward and 3 reverse
Clutchdry disc

PTO and Hitch

Rear PTO is independent at 540/1000 (1.375). Mid PTO is independent at 1000 (1.375). Rear hitch is typically Category II for many configurations.

Rear PTO

independent

Rear PTO type

540/1000 (1.375)

Engine RPM

540@1900

Rear hitch

II

Hydraulics

Hydraulics are closed center, 2250 psi (155.1 bar) with 2 valves and a hydraulic capacity of 9.5 gal (36.0 L).

Type

closed center

Capacity

9.5 gal 36.0 L

Pressure

2250 psi 155.1 bar

Valves

2

Fluids, Battery, and Service Facts

Maintenance notes reflect hydraulic capacity and a 12-volt electrical system; fluid types, filters, belts, and battery group require catalog or manual confirmation.

Fuel tank

29 gal 109.8 L

Hydraulic system

9.5 gal 36.0 L

Battery volts

12

Tires and Dimensions

Tire and dimension values can vary by wheel, axle, and configuration.

Weight

5624 to 6500 pounds

Front tire

9.00-18

Rear tire

16.9-24

Ag front

9.00-18

Ag rear

16.9-24

Electrical

Electrical rows are included when documented.

Ground

positive (12V)

Battery volts

12

Serial Number Lookup

Serial rows help narrow the 3010 by model year; prefixes, regional builds, and serial breaks require documentation before applying year tables.

1961

1000

1962

19801

1963

32400

final

46952

Manuals and Documents

Use these links to check the operator manual, service manual, parts catalog, or test report that matches the tractor's serial range and equipment.

When a source covers more than one model or variant, confirm the fuel type, transmission, PTO setup, and serial range before using it for parts or service.

  • John Deere 3010 Row-Crop and Standard Tractors Operators ManualOperators manual for John Deere 3010 Row-Crop and Standard Tractors (OMR32385).Open source
  • John Deere 3010 Row Crop Standard Tractor Operator Manual (OMR32385) — TherepairmanualOperator manual for 3010 Row-Crop Standard Tractor; 84 pages; third-party hosting.Open source
  • John Deere 3010 Operator Manual (OMR32385) listing in Deere catalogOfficial Deere price/catalog page indicating availability of the 3010 operator manual (OMR32385).Open source
  • John Deere 3010 Parts ManualParts manual for John Deere 3010 (diesel/gas/LP variants) and related family (3010/3020).Open source
  • John Deere 3010 Parts Manual (BLTTanks PDF)Open-cab/row-crop/standard variants; includes sections on engine, hydraulics, PTO, transmission.Open source
  • Nebraska Tractor Test 762: John Deere 3010 DieselNebraska Tractor Test Lab report for John Deere 3010 Diesel, 1960; includes PTO and drawbar power, fuel use, and test conditions.Open source

Parts Checks Before Ordering

Do not order John Deere 3010 parts from the model name alone. Match the part to the tractor's model code, serial range, engine, transmission, and PTO setup.

Fluids, filters, belts, electrical parts, clutch and PTO parts can vary by setup. Exact part numbers need a parts catalog, manual, or trusted supplier source before making a purchase.

Accuracy Note

Tractor specifications can vary by year, region, factory configuration, installed equipment, and later repairs. Match serial range, engine, transmission, PTO setup, and model code before ordering parts or doing service work.