Tractor Reference

Ford 2000 Tractor Specs (1962-1975)

Engine options, claimed power, hydraulics, PTO, transmissions, manuals, parts catalogs, and test data for checking a Ford 2000 configuration.

Ford 2000 Overview

Blue 1965-1975 Ford 2000 three-cylinder tractor on a gravel drive.

The Ford 2000 name covers more than one configuration, so the first job is identifying the tractor in front of you. Gas and diesel versions, later model changes, and industrial or all-purpose coverage can overlap in manuals and parts books.

Use serial range, engine type, transmission, PTO, and hydraulic setup before treating any one Ford 2000 source as universal. The operator manuals, shop manuals, parts catalogs, and Nebraska data here are meant to narrow that down before you buy parts or start service.

Years1962-1975
Engine134 ci 2.2 L | 144 ci 2.4 L
Transmissiongear | full power shift
Rear PTO540 (1.375)
Weight3020 to 3362 pounds
Serial number lookup1962: 1001 / 1964: 38931
Engine options134 ci gas / 144 ci diesel
Engine oil capacity5 qts 4.7 L
Hydraulic capacity2 gal 7.6 L

Ford 2000 Quick Answers

  • Production yearsThe Ford 2000 was produced from 1962 through 1975.
  • PowerPublished specs list gross engine power by fuel type: 48.4 hp for the gasoline engine and 42.7 hp for the diesel engine, respectively; claimed implement figures are 31 PTO hp and 28 drawbar hp.
  • Engine optionsGasoline rows use a 134 cu in four-cylinder engine, while diesel rows use a 144 cu in four-cylinder engine.
  • PTO and hitchRear PTO at 540 rpm; Category I rear hitch.
  • Service capacityEngine oil capacity 5 qts; transmission oil capacity varies (6, 8, or 11 qts); hydraulic system 2 gal; coolant 15 qts.

Engine and Power

Ford 2000 engine rows split between 134 cu in (2.2 L) gasoline and 144 cu in (2.4 L) diesel four-cylinder engines. Gross engine power is listed separately at 48.4 hp for the gasoline engine and 42.7 hp for the diesel engine, so match the fuel type before comparing power or tune-up data.

Gasoline engine

Ford / gasoline / 4-cylinder / liquid-cooled

Displacement134 ci 2.2 L
Bore Stroke3.4375x3.60 inches 87 x 91 mm
Power Gross48.4 hp 36.1 kW
Air Cleaneroil bath
Compression7.5:1
Rated Rpm2200
Torque121.6 lb-ft 164.9 Nm
Torque Rpm1600
Firing Order1-2-4-3
Starterelectric
Starter Volts6
Engine Oil Capacity5 qts 4.7 L
Coolant Capacity15 qts 14.2 L

Diesel engine

Ford / diesel / 4-cylinder / liquid-cooled

Displacement144 ci 2.4 L
Bore Stroke3.56x3.60 inches 90 x 91 mm
Power Gross42.7 hp 31.8 kW
Air Cleaneroil bath
Rated Rpm2200
Torque111.3 lb-ft 150.9 Nm
Torque Rpm1400
Starterelectric
Starter Volts12
Engine Oil Capacity5 qts 4.7 L
Coolant Capacity15 qts 14.2 L

Manufacturer

Ford

Manufacture years

1962-1975

Transmission

Transmission options span traditional gear configurations and the full-power-shift/automatic-style ranges: 4 forward and 1 reverse; 5 forward and 1 reverse; 10 forward and 2 reverse (Select-O-Speed); and 12 forward and 3 reverse (Over-Under). Clutch diameters and oil-capacities vary by variant.

4-speed gear

Typegear
Gears4 forward and 1 reverse
Clutch254mm dry disc
Transmission Oil Capacity6 qts 5.7 L

5-speed gear

Typegear
Gears5 forward and 1 reverse
Clutch228.6mm dry discs
Transmission Oil Capacity8 qts 7.6 L

Select-O-Speed

NameSelect-O-Speed
Typefull power shift
Gears10 forward and 2 reverse
Transmission Oil Capacity11 qts 10.4 L

Over-Under

NameOver-Under
Typegear
Gears12 forward and 3 reverse

PTO and Hitch

Rear power take-off is a 540 rpm arrangement, paired with a Category I hitch configuration in many Ford 2000 builds. These outputs should be matched to implement requirements and lift capacities.

Rear PTO

transmission

Rear PTO type

540 (1.375)

Rear hitch

I

Hydraulics

Open-center hydraulics provide 2000 psi system pressure with a 4.0 gpm pump flow and two remote valves. Hydraulic capacity is 2 gallons, a setup compatible with a range of loaders and implements depending on configuration.

Type

open center

Capacity

2 gal 7.6 L

Pressure

2000 psi 137.9 bar

Pump flow

4.0 gpm 15.1 lpm

Valves

2

Fluids, Battery, and Service Facts

Maintenance references list engine oil capacity at 5 qts, coolant at 15 qts, hydraulic capacity at 2 gal, and transmission oil options of 6, 8, or 11 qts depending on variant. Battery voltage is 6V on these models; fluid types and part numbers vary by engine and transmission setup.

Fuel tank

13 gal 49.2 L

Hydraulic system

2 gal 7.6 L

Battery volts

6 (gas/LP)

Tires and Dimensions

Tire and dimension values can vary by wheel, axle, and configuration.

Configuration-specific values are split out where the same model has documented differences by engine, transmission, or equipment.

Wheelbase

74.5 inches 189 cm

Weight

3020 to 3362 pounds

Length

113.6 inches 288 cm

Width

87.5 inches 222 cm

Front tire

5.50-16

Rear tire

12.4-28

Ag front

5.50-16

Ag rear

Configuration-specific values
  • 12.4-28
  • 13.6-28

Electrical

Electrical rows are included when documented.

Ground

positive (6V)

Charging system

generator

Battery volts

6 (gas/LP)

Serial Number Lookup

Serial numbers help narrow model year and variant; factory prefixes and regional builds are documented, but require source-backed confirmation before applying year breaks.

1962

1001

1963

11949

1964

38931

Manuals and Documents

Use these links to check the operator manual, service manual, parts catalog, or test report that matches the tractor's serial range and equipment.

When a source covers more than one model or variant, confirm the fuel type, transmission, PTO setup, and serial range before using it for parts or service.

Manual

  • Ford 2000 | 4000 Industrial Tractor Operators Manualoperation, maintenance, lubrication, safety notes, specifications

    Operator manual for Series 2000/4000 Industrial tractors; includes pre-start checks, operation, maintenance, lubrication, PTO, belt pulley, and wheel adjustment.

    Open source
  • Ford 2000 and 4000 Series All Purpose Tractor - Operator's Manualoperation, maintenance, safety notes, specifications

    Operator's manual for Ford 2000/4000 All Purpose tractors; 80 pages; sections include Safety, Tractor Model/Serial, Controls, Operation, Maintenance, Specifications.

    Open source

Parts catalog

  • Ford 2000 Parts Manual FO-P-2,3,4000parts matching

    Parts manual with exploded views and part numbers for Ford 2000 series (FO-P-2,3,4000); described as a reprint of the original factory manual; used for parts ordering.

    Open source

Service manual

  • Ford 2000, 3000, 4000, 5000 Service Manualoperation, maintenance

    Service (shop) manual covering Ford 2000/3000/4000/5000 series; includes engine, fuel, electrical, clutch, transmission, PTO, hydraulics, and workshops procedures.

    Open source

Shop manual

  • Ford 2000/3000/4000 Shop Manual (Verkstadshandbok) — Ford 2000/3000/4000operation, maintenance

    Shop/manual for Ford 2000/3000/4000 (and related models); Swedish Verkstadshandbok listing; file name ford_2000-3000-4000_verkstadshandbok_sec_wat.pdf; indicates availability and s

    Open source
  • Ford 3000/2000/4000 Parts Catalog (DTP Ford 3000) — Discount Tractor Partsparts matching

    Parts catalog for Ford 3000/2000-series tractors; exploded parts views and part numbers; includes accessory and maintenance parts listings.

    Open source

Tractor test report

  • Test 844: Ford 2000 Super Dexta Dieseltested performance

    Nebraska Tractor Test Lab report for the Ford 2000 Super Dexta Diesel variant; includes engine details, PTO testing, and ballast-effect data.

    Open source

Parts Checks Before Ordering

Do not order Ford 2000 parts from the model name alone. Match the part to the tractor's model code, serial range, engine, transmission, PTO setup, and build year before choosing service parts.

Filters, fluids, belts, electrical parts, clutch and PTO parts, and hydraulic parts can vary by setup. Exact part numbers need a parts catalog, manual, or trusted supplier source before they become recommendations.

Accuracy Note

Tractor specifications can vary by year, region, factory configuration, installed equipment, and later repairs. Match serial range, engine, transmission, PTO setup, and model code before ordering parts or doing service work.