Tractor Reference

Ford 4610 Tractor Specs (1981-1989)

Engine, PTO, hydraulics, transmission variants, serial rows, Nebraska Test 1426/1427 context, manuals, and parts-diagram references for the Ford 4610.

Ford 4610 Overview

Ford 4610 tractor on a gravel farm drive.

The Ford 4610 is a three-cylinder utility tractor in Ford's 10 Utility Series, with published production coverage from 1981 through 1989. The engine table has separate 201 ci diesel and gasoline rows. Other published rows list open-center hydraulics, an independent 540-rpm rear PTO, and 8-speed transmission coverage.

Power data needs context. Nebraska Test 1426 covers the Ford 4610 and 4610 SU diesel 8x2 2WD configuration, while Test 1427 covers the diesel 8x4 2WD configuration. Those results should stay separate from the general engine and claimed-PTO rows.

Before using a Ford 4610 spec for service or parts work, match the model code, serial row, engine fuel type, transmission, PTO setup, and 2WD/4WD equipment.

Years1981-1989
Engine201 ci 3.3 L
Transmissionsynchromesh
Rear PTO540
Weight4806 lbs 2180 kg
Serial number lookup1982-1990 serial rows
Engine optionsDiesel 201 ci / Gasoline 201 ci
Engine oil capacity7 qts / 6.6 L
Hydraulic capacity12.1 gal / 45.8 L

Ford 4610 Quick Answers

  • Production yearsPublished production coverage for the Ford 4610 is 1981 through 1989.
  • PowerNebraska results are configuration-specific: Test 1426 (diesel 8x2 2WD) lists 52.52 PTO hp and 44.28 maximum drawbar hp; Test 1427 (diesel 8x4 2WD) lists 52.32 PTO hp and 43.17 drawbar hp.
  • EngineThe engine table has separate Ford 201 ci diesel and gasoline rows; the diesel row lists 60 net engine hp and 63 gross engine hp, while the gasoline row lists 56 net engine hp and 60 gross engine hp.
  • PTO and hitchRear PTO is independent at 540 rpm; rear hitch is Category II/I.
  • HydraulicsOpen-center hydraulics with about 8.5 gpm pump flow and 1 hydraulic outlet standard.
  • Service capacityPublished capacities include engine oil 7 qts, coolant 11 qts, hydraulic system 12.1 gal, and transmission oil of 12.7 qts for the 8x2 row or 9.9 qts for the synchromesh row.

Engine and Power

The engine rows split the Ford 201 ci three-cylinder by fuel. The diesel row lists 60 net engine hp and 63 gross engine hp, while the gasoline row lists 56 net engine hp and 60 gross engine hp. Use Test 1426 or Test 1427 only for diesel PTO and drawbar figures; do not blend those results with the gasoline row.

Diesel engine

Ford / diesel / 3-cylinder / liquid-cooled

Displacement201 ci 3.3 L
Bore Stroke4.4x4.4 inches 112 x 112 mm
Power60 hp 44.7 kW
Power Gross63 hp 47.0 kW
Air Cleanerdry
Pre Heatingthermostart
Compression15.3:1
Rated Rpm2200
Torque168.5 lb-ft 228.5 Nm
Torque Rpm1400
Starter Volts12
Engine Oil Capacity7 qts 6.6 L
Coolant Capacity11 qts 10.4 L

Gasoline engine

Ford / gasoline / 3-cylinder / liquid-cooled

Displacement201 ci 3.3 L
Bore Stroke4.4x4.4 inches 112 x 112 mm
Power56 hp 41.8 kW
Power Gross60 hp 44.7 kW
Air Cleanerdry
Compression7.75:1
Rated Rpm2200
Torque173 lb-ft 234.6 Nm
Torque Rpm1100
Starter Volts12
Engine Oil Capacity7 qts 6.6 L
Coolant Capacity11 qts 10.4 L

Manufacturer

Ford

Manufacture years

1981-1989

Engine

60 hp 44.7 kW

Transmission

Transmission rows include an 8 forward/2 reverse Dual Range setup and an 8 forward/4 reverse synchromesh setup. Nebraska Test 1426 is the diesel 8x2 report, and Test 1427 is the diesel 8x4 report.

Dual Range

NameDual Range
Gears8 forward and 2 reverse
Transmission Oil Capacity12.7 qts 12.0 L

8-speed synchromesh

Typesynchromesh
Gears8 forward and 4 reverse
Transmission Oil Capacity9.9 qts 9.4 L

PTO and Hitch

The rear PTO is listed as independent 540 rpm, paired with a Category II/I rear hitch. Keep PTO horsepower attached to the exact Nebraska test configuration before comparing tractors or implements.

Rear PTO

independent

Rear PTO type

540

Engine RPM

540@1800

Rear hitch

II/I

Rear lift at 24 inches

3080 lbs 1397 kg

Hydraulics

Hydraulic specs list an open-center system with 12.1 gal capacity, one valve, and 8.5 gpm pump flow. Treat pump options and remote-valve equipment as configuration checks on the actual tractor.

Type

open center

Capacity

12.1 gal 45.8 L

Pump flow

8.5 gpm 32.2 lpm

Valves

1

Fluids, Battery, and Service Facts

Maintenance rows are useful for capacities: engine oil 7 qts, coolant 11 qts, fuel 16 gal, hydraulic system 12.1 gal, and 12 V battery data. Fluid types, filters, belts, and intervals still need the matching operator manual or parts source.

Fuel tank

16 gal 60.6 L

Hydraulic system

12.1 gal 45.8 L

Battery volts

12

Tires and Dimensions

Tire and dimension values can vary by wheel, axle, and configuration.

Configuration-specific values are split out where the same model has documented differences by engine, transmission, or equipment.

Weight

4806 lbs 2180 kg

Length

138.8 inches 352 cm

Width

67.5 inches 171 cm

Front tire

7.50-16

Rear tire

14.9-28

Ag front

Configuration-specific values
  • 7.50-16 (2WD)
  • 7.50-18 (2WD)

Ag rear

Configuration-specific values
  • 14.9-28
  • 14.9-30

Electrical

Electrical rows are included when documented.

Ground

negative

Charging system

alternator

Battery volts

12

Serial Number Lookup

The serial rows include C, BA, BB, and BC prefixes. Use the stamped location, model code, engine, transmission, and build-year evidence before treating a serial row as a parts or service cutoff.

Configuration-specific values are split out where the same model has documented differences by engine, transmission, or equipment.

1982

C681910

1983

C695880

1984

C713459

1985

C737800

1986

C754100

1987

Configuration-specific values
  • C768000
  • BA80100

1988

Configuration-specific values
  • BB06622
  • BB31777

1989

BB80620

1990

BC26239

location

Plate inside engine compartment and front-right transmission cover

Manuals and Documents

The documents below cover operator controls, maintenance categories, model-specific parts diagrams, and tested performance for the Ford 4610.

The Nebraska reports are configuration-specific. Each test card names the transmission and diesel test setup so the numbers do not read as blanket 4610 data.

Tractor test report

  • Nebraska Test 1426: Ford 4610 diesel 8x2tested performance

    Official Nebraska Tractor Test page for the Ford 4610 and 4610 SU diesel 8x2 2WD test configuration.

    Open test report
  • Nebraska Test 1427: Ford 4610 diesel 8x4tested performance

    Official Nebraska Tractor Test page for the Ford 4610 and 4610 SU diesel 8x4 2WD test configuration.

    Open test report

Operator manual preview

  • Ford 2810 | 2910 | 3910 | 4610 Tractor Operators Manualoperation, lubrication, maintenance, controls

    Operator manual preview for Ford 2810/2910/3910/4610 Series II tractors; useful for controls, operation, lubrication, and maintenance categories.

    Open preview PDF

Parts catalog mirror

  • New Holland 4610 parts diagramsparts matching, parts system categories

    Model-specific New Holland 4610 3-cylinder all-purpose parts-diagram mirror, 01/81-02/90.

    Open parts diagrams

Parts catalog

  • Ford and Ford-New Holland tractor parts supportparts matching

    Official New Holland parts landing page for legacy Ford tractors; use model search and diagrams before ordering parts.

    Open parts support

Parts Checks Before Ordering

Do not order Ford 4610 parts from the model name alone. Match the part to the tractor's model code, serial range, engine, transmission, PTO setup, and build year before choosing service parts.

Filters, fluids, belts, electrical parts, clutch and PTO parts, and hydraulic parts can vary by setup. Use a parts diagram, operator manual, or trusted supplier source before treating a part number or fluid recommendation as final.

Accuracy Note

Tractor specifications can vary by year, region, factory configuration, installed equipment, and later repairs. Match serial range, engine, transmission, PTO setup, and model code before ordering parts or doing service work.